Grahame N's Web Pages


9.5MM
RAY
CINE PROJECTORS


 

RAY Construments Ltd., 18 Grays Inn Road, London, UK
Dist: Leon Rees & Co. 12 New Union Street, London EC2

 


CONSTRUMENTS LTD. (1932 - 1936?)


Typical Construments optical construction kit

Construments was a company whose main product was a series of multi-purpose optical kits, consisting of lenses and tubes intended to give the scientifically minded child the opportunity to make his/her own microscopes, telescopes etc. The top of the range outfit made it possible to construct three 'types of cinematograph projector'. I'm sure, whilst not advertised in the amateur movie magazines of the day, there may have been advertisements in the children's hobby magazines like the 'Meccano Magazine'.

During the 1930s, Construments produced a number of 9.5mm cine projectors, simple even dare I say, 'crude' designs in many cases. So whilst these tin-plate toys do still turn up today, they were destined for sale in toy shops rather than proper photographic retailers. The 9.5mm cine projectors produced by Construments in the UK included those labelled 'Bingoscope' and 'Bing British', at least two models bore the brand name 'Ray' - these were possibly from the early to mid. 1930s - they even had a metal name plate! Looking at the name plate above we see that there were even a couple of British patents - 29063 & 29064.


9.5MM RAY CINE PROJECTOR 1


The simple 9.5mm 'Ray' cine projector - model 1

The first 'Ray' 9.5mm cine projector arrived around 1933. It was made in the UK by Construments Ltd with a very simple design. Hand-turned, it could only accept the then standard 30 foot / 10 metre and 60 foot / 20 metre film cassettes. At the rear was an integral lamp holder accepting an M.E.S. torch bulb, fed from a cycle lamp battery. It had a non accesible brass film gate, a tiny external flywheel and a simple lens. Threre was a small condenser lens behind the film gate. Results were not too good, a dimmish picture and film scratching being caused as the film was rewound into the cassette.


9.5mm 'Ray' cine projector - model 1, operating side


9.5MM RAY CINE PROJECTOR 2


The second 'Ray' 9.5mm cine projector

The second 'Ray' 9.5mm cine projector had a simmilar mechanism to the first model, but with slight improvements. The lamphouse hinged back to reveal the chromed film gate. Whilst the basic model still just accepted the 30 foot / 10 metre and 60 foot / 20metre film cassettes, I believe a super attachment was available to take spools. Supplied again as battery fed, a version was offered to operate from the household mains electricity supplies via a dropper resistance.


9.5mm 'Ray' cine projector - model 2 - opened up

Sadly not recommended for actual showing 9.5mm printed films; perhaps the best part of the 'Ray' was that smart metal badge!


'Ray' 9.5mm cine projector - model 2 - side open with lamphouse dropped back


9.5MM RAY CINE FILMS


Ray 9.5mm 10 foot / 3 metre printed film

In addition to the little 'Ray' 9.5mm cine projectors, Construments also distributed little short (very short - 10 foot / 3 metre!) 9.5mm printed films to be sold alongside the projectors. For a list of titles etc. see my 9.5mm printed film catalogue entries for 'Bingoscope' and 'Ray'.


Ray 9.5mm 15 foot / 5 metre printed film

Thanks to 9.5mm film historian Maurice Trace, a 15 foot / 5 metre 'Ray' printed film has also turned up - amazing what is still lurking out there to find!


REFERENCES

1. Gerld McKee - "The Home Cinema - Classic Home Movie Projectors 1922-1940" (Privately published by the author) - ISBN 0 9515905 0 2

I would be most grateful for any extra details or information!. Contact me at:- presto@pathefilm.uk

©Grahame L. Newnham - 9Jul2019 .


Return to: 9.5 EQUIPMENT PAGE ............ or NINEFIVE MENU ............ or return to MAIN MENU


Created 09Jul2019 .......... Last updated: 22 December 2019 ............ 95gearray.htm ............ ©Grahame L. Newnham's web pages - MMX1X
22Dec2019 - Ray 15ft printed film added