Grahame N's Web Pages
9.5MM
MICKEY MOUSE
CINE PROJECTORS
from Grahame Newnham
Mickey Mouse 9.5mm cine projector box - this says
'Model B' on the reverse
Obviously for sale in the UK in the 1930s, but 'foreign
manufacture'
- where was it made? Read on....
In the 1930s, many 9.5mm simple cine projectors were imported and rebadged for sale in the UK with other brand names. However, often the familiar entwined 'LM' Müller emblem remains on the lamphouse (or is covered with a new label! We know that another 'Mickey Mouse' 9.5mm cine projector was manufactured as it has the logo on the lamphouse - see the photograph at the bottom of this page.
The entwined 'LM' Müller Logo
The Müller projectors were simple design
pressed steel construction. Normally a single or double bladed
barrel shutter and a simple cam driving a twin claw. Most
machines were intended just for short 10 foot or 15 foot rolls of
9.5mm printed films, some also having provision for the 9.5mm 30
foot and 60 foot 'closed cassettes'.
The little 9.5mm film shorts were generally printed by
Pathéscope, but the shorter 10 foot and 15 foot rolls were
marketed under names like 'Bing', 'Bing British' or 'Bingoscope'.
There was usually a take-up spool fixed to the projector, with
one side removeable, (held with a spring wire clip), for
threading. The feed spindle normally had a handle for rewinding
the film. Illumination was either battery, using the 4.5 volt
'flat' battery often used in torches & cycle lamps (these are
still obtainable today! (gln
05May2017) or using a normal
household lamb bulb (40 or 60 watts). Naturally this produced a
very dim picture, not a patch on the trusty Pathéscope
"Ace" with its 20 volt 10 or 20 watt lamp and quite
decent optical system!
Leonard Müller projector instruction booklet outer pages
My 'Mickey Mouse' 9.5mm cine projector - model 'B'
Looking at the Müller leaflet above, the lovely little machine I have, may possibly be the same as 'Fig.1' . The pressed steel base does look very similar, as does the top film cassette bracket and holder and the integral 'split' take-up spool.. Looks like the rounded wooden knob on the drive handle is missing - must find a suitable bead!
UK Pathéscope got the rights to Walt Disney-Mickey Mouse cartoons in 1929, so we can assume these 'Mickey Mouse' 9.5mm cine projectors arrived very early in the 1930s (they were obviously designed before the larger 300 foot / 100 metre spools arrived, or possibly even before the little film shorts arrived on spools rather than cassettes.
This little novelty runs from a 'flat' type 4.5 volt battery - and these are still available! It has a twin barrel shutter and twin claw driven by a simple cam. But the biggest feature is the colour cardboard box! It even has a white screen on the side (optimistic to get a picture even that big with a tiny torch bulb!)
9.5mm 'Mickey Mouse' projector on it's box - 'Model B' it
seems

The lovely box even has a white screen!
Another 'Mickey Mouse' simple 9.5mm cine projector - sold in
the UK in the 1930s
typical Müller pressed steel lamphouse and base. The 'Mickey
Mouse' label covers the Muller logo
This machine has the same lens as my example shown further up this page. Dare I suggest that this one could be the 'Model A'?
I just need to find some typical 9.5mm toy cine projector adverts from the earlier 1930s to confirm some of the above! Small boys' toys I think - maybe 'The Meccano Magazine' is a good place to start! Watch this space!
Meantime if anyone provide extra
information, (or spot my usual 'typos' etc.) - please email me -
Grahame Newnham at:
presto @
pathefilm.uk (no spaces in actual address)
Return to: 9.5 EQUIPMENT PAGE ............ or NINEFIVE MENU ............ or return to MAIN MENU
Created 11May2017 .......... Last updated: 11 May 2017 ...........
95gearmmouse.htm ............ ©MMXV11 Grahame Newnham's Web
Pages